I'll need to address a problem with the sway bar before driving around much. There is not much travel to the suspension before the sway bar contacts the frame rail.
The gap was around 1" with the first set of end links installed. I switched to a different set which is 1" shorter. This gained about 1/2" at the frame rail which is better but not perfect. The sleeve in the end link is only 1 1/2" so I'm not sure if it would hurt to go shorter or not.
The gap was around 1" with the first set of end links installed. I switched to a different set which is 1" shorter. This gained about 1/2" at the frame rail which is better but not perfect. The sleeve in the end link is only 1 1/2" so I'm not sure if it would hurt to go shorter or not.
No comments:
Post a Comment