Sunday, June 9, 2019

Preparing for Ford Nationals - Radiator Upgrade 3 - Mounting Bracket Work

This evening, I worked on a way to mount the new radiator in place with the inadequate mounts I purchased from Scott Drake.

The following looks sketchy at best but I made two mounts which connect to the factory radiator mount location and extend over to the lower mounts on each side of the radiator.  The saddles at the bottom will then hold some weight and protect the bottom of the radiator from large bumps.  These will hold the radiator, along with the top mount, from moving either forward or backward once installed.  

Driver Side:

Passenger Side"

No comments: